Hard drive
Most modern laptops use 2.5″ hard drives. Older laptops use IDE hard drives, newer laptops use SATA hard drives. SATA and IDE drives are not interchangeable, they have absolutely different connectors.
If your laptop came with an IDE hard drive you cannot replace it with a SATA drive. The connector on your drive will not mach connector on the motherboard.
As you see on the pictuer above, a SATA drive has two flat connectors and an IDE drive has two rows of pins.
SATA hard drives has faster data transfer rate then IDE drivers. SATA – 150MB/s and IDE – 100/133MB/s.
Laptop hard drives spin at different speeds and most common are 4200RPM, 5400RPM, 7200RPM.
The RPM number indicates how fast the hard drive platters spin. Hard drives with high RPM number are quicker than hard drives with low RPM number because they can access data faster.
SATA connectors on a laptop hard drive are similar to SATA connectors on a destkop hard drive. You can connect a SATA laptop hard drive to a desktop computer using same SATA cables.
WHERE HARD DRIVE IS LOCATED IN A LAPTOP.
On most laptops the hard drive can be accessed from the bottom.
On some laptops the hard drive is burried inside the case and it’s necessary to disassemble the laptop in order to access and replace the hard drive.
HARD DRIVE UPGRADE.
A hard drive is the slowest part in any laptop. If you would like to speed up your laptop, replace your low RPM drive with a faster one. Fast RPM drives are backward compatible with low RPM drives.
If you would like to install a larger hard drive, take a look at the user’s manual and laptop specifications. Make sure your laptop supports larger drives.
June 20th, 2010 at 12:16 pm
Hello.
I have a 5yr old laptop with an IDE drive that isn’t recognized in the BIOS. Is a pin bent an intermediate connector missing all i have at the moment is a large open slot and the bracket carrier. is the motherboard interface broken?
I ordered a tiny thin rigid black plastic connector from Ebay but worry it isn’t what i needed and will stay wedged out of reach in the slot.
It works okay using a linux live cd and a USB thumbdrive for stored files;-)
@James – Disk burning software dpesn’t always offer the option to burn an *image* to disk but that is what you want to do. It sounds like the FILE was saved to disk. An image can be read by hardware and is bootable.
Windows Powertoys for XP ISO Image Burner Free (Microsoft) was retired so. i have been using ISO Recorder v 2 Free/Donationware.
Great site and an informative discussion i really appreciate it.
June 13th, 2010 at 7:35 pm
marcelle,
Maybe you are talking about a connector which has to be removed before you install the hard drive into the enclosure?
Your hard drive should be a regular IDE drive.
June 13th, 2010 at 6:33 pm
Hi! I have a Samsung MP0804H HD (80MB). It is supposed to be a ATA. The HD connection does not have 2 rows of 22 pins like the one you show (and everywhere. Mine has only one row with 22 pins plus 2 other pins separate. I want to buy an enclosure but does not know what to buy. Can someone help me?
April 23rd, 2010 at 9:35 am
Hi, i’m using Compaq CQ35-216TU (Vista), having a problem when downgrading to XP. No option to disable native SATA in BIOS. Bluescreen problem while setup XP. How to resolve? TQ
April 23rd, 2010 at 7:39 am
ANDREA,
You cannot modify the laptop. There is no way you can install a new SATA hard drive into your laptop. If you would like to replace or upgrade the hard drive, you’ll have to find another IDE drive.
By the way, you said the laptop is old and had a 20GB hard drive. There is a chance that your old laptop will not support larger drives. It’s possible that the laptop can support 40-60GB drives but not 120GB drives. You’ll have to do some research.
April 23rd, 2010 at 3:43 am
Hi, I have a Microstar laptop, very old, and I would like to upgrade my existing IDE hard drive MHN2200AT 20GB with a new SAMSUNG HM160HI,
I searched a lot, till I found at the top of this page my IDE-SATA problem. Can I do any modify or is it impossible? I couldn’t find any forum about that. Thank you for your help.
andrea . ITALY
April 15th, 2010 at 10:32 pm
Brian,
Why do you think your laptop overheats? Have you tried removing dust from the heat sink and cooling fan?
If the hard drive fails internal BIOS test, most likely it has a problem and has to be replaced.
OK, you’ve replaced the hard drive but XP doesn’t recognizes the new drive. What could be wrong? It’s possible that you have to load drivers for the new hard drive while loading XP. Isn’t your laptop designed for Vista. I’m sure if you start installing Vista, it will recognize the hard drive.
When you are installing XP, there should be an option to load hard drive drivers. Start the installation process and look carefully at all messages at the beginning of the installation. I believe you’ll have to press F6 (could be a different F* key) to load hard drive drivers.
You’ll have to find the driver, safe it on a floppy disc, connect the floppy drive to the laptop and load the driver while installing XP. This is my guess.
Where to get this driver? I don’t know. Check the HP website and go through all downloads available for XP.
April 15th, 2010 at 9:43 pm
I have here a HP Pavilion dv6000…
first and foremost from most of the research I have conducted I see that they are notorious for overheating and such. I came across a link to update the BIOS and I guess it is suppose to tell the fans to run more… BIOS update here …. I was wondering if anyone would take a look at this as I have never updated a BIOS and am a bit fearful of messing something up. Does this seem legitimate?
And the other thing…
I suppose the overheating is causing this. The RAM to having VISTA ratio is pretty bad on this persons computer. So, I was(am) going to install XP so that the resources won’t be so bogged down all the time. the only reason she uses it is ebay anyway. Regardless … when I goto the setup on bootup for XP it says that it cannot install XP because the hard drive cannot be found or read. (this disc works on all other tested computers (3) to be double sure ) So, I do a HDD test in BIOS and it says to replace hard disc. From research replacing the HDD has worked for people. So, I go a buy a new HDD for her and put it in… nothing changes. The XP install won’t continue because it says the HDD cannot be read. Now, on the original vista still loads. In fact you can spend a considerable amount of time (maybe 1 hour) before the HDD/screen freezes up. Which this seems like a bad sector or something some kind of virus or something of that nature. Yet – as I said putting a new HDD isn’t working. So, I am about to attempt to install XP on the new disc from another external computer and then put it in the laptop to see if it’ll load. Other than that I am at a stand still… could I please get some help. Thank you so much in advance
also
I would like to add that I’ve done the BIOS diagnostics test on both HDD. The original with Vista that will load vista but not recognize a HDD through XP boot install fails the BIOS test. The NEW that will also not recognize a HDD in Windows XP boot install PASSES the BIOS test. Maybe this will help? I reseated everything in the back that I could ( RAM/HDD )
March 8th, 2010 at 5:58 pm
Repair Man,
Hi, I am trying to fix a Toshiba Satellite 1905-S301 for a friend. He found the laptop somehow and it didn’t have a hard drive or power supply. I ordered the parts from Amazon and upon trying to install the HDD found that it didn’t fit. Do you happen to know if there is a carriage for this model of laptop with an adapter cable? They are both IDE type connections but the new drive just doesn’t fit, Toshiba website doesn’t offer much useful information.
December 5th, 2009 at 2:59 pm
many thanks!
December 5th, 2009 at 2:58 pm
I intend to change the 100GB HD of my Toshiba M45, upgrading capacity to 250 or 320GB. Current HD has an IDE connector (but not like the photo above, more like the SATA connector although IDE for sure). Is this type of connector commonplace? Most pictures I’ve seen show IDE connectors just like the one the picture.
December 3rd, 2009 at 11:16 pm
Hello, Repair man. My laptop, Toshiba. Wont start up. it freezes at the toshiba logo. and makes a staic/popping noise.
What is the issue?
help, please
September 19th, 2009 at 1:12 pm
My laptop has a 128Gb Solid State Hard Drive. It is hella fast.
June 22nd, 2009 at 6:03 pm
Paul,
Some motherboard have both types of connectors IDE and SATA. Take a closer look on the motherboard. Maybe your motherboard has SATA connectors. If that’s the case, all you have to do is buy SATA cables and connect them to your new hard drive.
June 22nd, 2009 at 3:58 pm
I recently bought a Western digital SATA 160gb hard drive for an HP Pavilion desktop computer – a335w. I now know that the cables were IDE type. Is there any way to adapt the SATA drive to the IDE cable? I am asking for a replacement from the eBay seller with a similar size hard drive that would be compatible with the older type of cables. Is that my only option?
May 8th, 2009 at 1:21 pm
I just replaced my original 80GB SATA hard drive with a new 320GB SATA hard drive. Works like a charm!
Man, these drives are so cheap these days. I got mine for $67 and free shipping.
April 21st, 2009 at 10:32 am
George,
There will be no problem. Even though the internal hard drive is a SATA drive, you still can use an IDE drive in an external enclosure. Just make sure your enclosure is made for IDE drives so the connector inside matches your hard drive.
April 21st, 2009 at 10:24 am
My laptop uses a SATA hard drive, and I was wondering if there would be any problem with plugging in an IDE hard drive in an external USB enclosure into my laptop?
April 7th, 2009 at 9:41 am
James,
I’m not sure, both images have the same size. Go just with KNOPPIX_V6.0.1CD-2009-02-08-EN.iso
Yes, you’ll have to download the ISO file and burn it as image (not data CD). Start your burning software and select burn disc image. This will make your CD bootable. If you still don’t know what I’m talking about, Google “How to burn ISO file”.
After that you should be able to boot the laptop from that bootable CD even with the hard drive removed.
I’ve noticed that some newer laptops will not boot from Knoppix CD, but most of them do.
April 7th, 2009 at 9:19 am
Hi Repair Man,
For the Kpoppix Linux CD, do I download the V6.0.1 CD.iso or V6.0.1-AdrianeV1.1CD.iso?
Once I have it on CD I can remove the hard drive, insert the CD into the CD rom, and boot the laptop? The system will read the .iso file? am I missing any steps?
thanks.